Knowledge Base
 
   

Barcode field requirements

Article ID: 356
Last updated: 06 Feb, 2019
Revision: 2
print  Print
comment  Add comment
Views: 135
Comments: 0

SunLync users can configure certain items so that they may be scanned into the system for easier searching.  However, there are certain requirements that must be met for this function to work correctly.  See below for a list of these requirements:

Customer

  • Must be at least 4 characters long, but not more than 20 characters in length
  • A 12 character scan code must start with either 4 or 9
  • Cannot start with the letters M, P, or C.

Inventory

  • Must be 12 characters exactly
  • Cannot start with the numbers 4 or 9

Membership

  • Cannot be longer than 20 characters
  • Must be at least 2 characters
  • Must start with the letter M

Package

  • Cannot be longer than 20 characters
  • Must be at least 2 characters
  • Must start with the letter P

Promotion

  • Cannot be longer than 20 characters
  • Must be at least 2 characters
  • Must start with the letter C
This article was:   Report an issue